Enterasys Networks CSX6000 User Manual
Page 210
USER’S GUIDE
210 CyberSWITCH
For Device Level Security:
•
Specify Device Level Security (from Main Menu, Security, Security Level)
•
Select RADIUS from Off-Node Device Database Location (Main Menu, Security, Device
Level Databases)
For User Level Security:
•
Select User Level Security (from Main Menu, Security, Security Level)
•
Enable RADIUS Authentication Server (from Main Menu, Security, User Level Databases)
If you are using an
Server, you must reflect this correctly under Main
Menu, Security, Off-node Server Information, Misc Off-node Server Options.
U
SING
CFGEDIT
1.
Select option (2), RADIUS from the Off-node Server Information menu. If you need guidance
to find this menu, refer to the instructions provided in the
configuration section. The following screen will be displayed:
2.
Select (1) Primary Server to enter the following information:
a.
IP address of the Authentication Server
b.
shared secret between the CyberSWITCH and Authentication Server
c.
UDP port number used by the Authentication Server
3.
Optional: configure a secondary RADIUS Server with selection (2). In the event that the
primary server does not respond to system requests, the secondary server will be queried for
device authentication information. The address of the Secondary RADIUS Server must not be
the same as the Primary RADIUS Server.
4.
Select Miscellaneous Information to finish the configuration. Specify the number of access request
retries that the system will send to the Authentication Server, as well as the time between
retries.
RADIUS Authentication Server Menu:
Primary Server
IP Address is 128.111.011.001
Shared Secret is "SHAREDSECRET1234"
UDP Port Number is 5800
Secondary Server
is Not Configured
Access Request Retry
Number of Access Retries is 5
Time between Retries is 2 seconds
RADIUS Server Options:
1) Primary (Master) Server
2) Secondary (Slave) Server
3) Miscellaneous Information
Select function from above or <RET> for previous menu: