Enterasys Networks CSX6000 User Manual
Page 626
USER’S GUIDE
626 CyberSWITCH
trace x25 [on/off]
Enables or disables the X.25 packet tracing option. This feature displays up to 15 octets of the
packet. To display the log file, issue the
dr
console command. This option is initially disabled.
x25 clear
Clears the statistics counters associated with the
x25 stat
command for the currently
selected access and LCN.
x25 clearall
Clears all statistics associated with the
x25 stat
command for the currently selected access
and LCN.
x25 display [access name]
Displays the configuration for the default X.25 access if no access name is specified. If an access
name is specified, the configuration for that access is displayed. Note that this also includes any
configuration information of any PVCs associated with this access.
x25 l <LCN “m”>
The “l” option will set the Logical Channel Number (LCN) index specified by “m” as the
default LCN for subsequent commands entered without an explicit LCN specifier. LCN “m”
will remain the default LCN until the default is changed through reissuing the
x25 l <lcn
“m”>
command.
x25 a <access name>
The “a” option will set the access name specified by
<access name>
as the default access for
subsequent commands entered without an explicit access specifier. This access name will
remain the current access, until it is changed through issuing another
x25 a <access name>
command.
Note:
This command may be used with all other x25 commands. For example,
x25 a acc1
vc
would be a valid command, changing the default X.25 access to “acc1”, and would
display virtual circuit information for the X.25 access named “acc1”.
x25 stats
Displays the statistics associated with the X.25 access. Refer to
for a list of
available statistics and their definitions.
x25 vc <LCN>
Sets the default virtual circuit (VC) by specifying the VC’s LCN. This VC will be the default for
subsequent
vc
commands. This VC will remain the default VC, until it is changed through
issuing another
x25 vc <LCN>
command.
x25 vc active
Displays a list of all active VCs for the default X.25 access and LCN.
x25 vc clear
Clears the statistics for the default VC.
x25 vc stats
Displays the statistics for the default VC. Refer to
for a list of available statistics
and their definitions.