Enterasys Networks CSX6000 - Manual (Page 477)

Central Site Remote Access Switch 477
LCD M ESSAGES
LCD Message Groups
System unable to access file. Check for one of the following log error messages:
Error opening file <file name>
Error reading file <file name>, section = <section name>
Error opening file <file name>, slot <slot #>
Read 0 bytes from file <file name> for WAN card in slot <slot #>
Failure during read of file <file name> for WAN card in slot <slot #>
Error closing file <file name>, slot <slot #>
Error closing password data file
Error opening password data file
Failure on closure of file <file name>
Failure opening file <file name>
Failure on file closure <file name>
Failure on write of file <file name>
If you see any of the above log messages repeatedly, there may be a problem with your hard drive.
Contact your Distributor or Customer Support.
LAN connection failure. Hardware failure detected on the Ethernet LAN adapter. Check for one of
the following log error messages:
Manual intervention required: please replace LAN card
Lan Adapter HW upgrade required
Lan Adapter HW upgrade may be required
With any of the above messages, refer to the System Messages chapter for specific error message
resolution.
LAN connection failure. Initialization failure detected by the LAN packet forwarding component
in the system.
LAN connection failure. LAN packet transmit error detected by the system.
ISDN line failure. The data link for the line connected to slot “s” port “p” is down.
LAN HW Error
LAN Init Error
LAN Xmit Error
Line (s,p) Down