Enterasys Networks CSX6000 - Manual (Page 701)

A
DMINISTRATIVE
C
ONSOLE
C
OMMANDS
T
ABLE
The following table lists all system administration commands. Guest commands are identified in
the command column.
Command
Use
? (GUEST) displays help screen
atalk arp displays the AARP cache
atalk ping <dnet>.<dnode>
{timeout/dnnn]
example:
atalk ping 1.3 30 /d200
pings a specified device, where:
dnet = destination network number (required)
dnode = destination node ID (required)
timeout = seconds to wait for reply (optional)
nnn = data size included in ping packet (optional)
atalk port displays AppleTalk port information
atalk port stats [clear] displays or clears current AppleTalk port statistics
atalk route displays AppleTalk static route information
atalk stats displays all six groups of current AppleTalk statistics
the commands below display individual group statistics
atalk stats atp displays current AppleTalk ATP statistics
atalk stats ddp displays current AppleTalk DDP statistics
atalk stats echo displays current AppleTalk AEP statistics
atalk stats nbp displays current AppleTalk NBP statistics
atalk stats rtmp displays current AppleTalk RTMP statistics
atalk stats zip displays current AppleTalk ZIP statistics
atalk zone displays AppleTalk zone information
br stats displays current packet statistics
br stats clear clears current packet statistics
br stpbrdg displays Spanning Tree bridge information
br stpport <port # > displays Spanning Tree information for the specified port
call peer
<phone number> [data rate] calls a device at the given phone number, data rate is
optional
call device <device name> calls the specified device
cdr stats (GUEST) displays call detail recording statistics
cdr stats clear (GUEST) clears current call detail recording statistics