Enterasys Networks CSX6000 - Manual (Page 373)

Central Site Remote Access Switch 373
C ONFIGURING C ALL C ONTROL
Call Restrictions
U SING M ANAGE M ODE C OMMANDS
alarm
Displays the current status of the audible alarm. It is displayed as either enabled or disabled. If
enabled, the audible alarm will sound when a call restriction condition has been met.
alarm off
Disables the audible alarm that sounds when a call restriction condition has been met.
alarm on
Enables the audible alarm that sounds when a Call Restriction condition has been met.
callrest
Displays the current Call Restriction configuration data.
callrest off
Disables the Call Restriction feature.
callrest on
Enables the Call Restriction feature.
C ALL R ESTRICTION C ONFIGURATION E LEMENTS
S TATUS
Allows you to enable or disable the call restriction option.
H OURS C ALLS ARE A LLOWED
The allowable hours for outbound calls (inbound calls will always be allowed). Separate each hour
by a comma. Ranges are allowed by inserting a dash (-) between the first and last hours in the range.
A zero entered by itself will allow no calls during any hour.
Two actions are available if an outbound call is attempted at any other time:
1. The call will not be allowed; a message will be displayed on the LCD, and written to the report
log.
2. The call will be allowed; however, a warning will be displayed on the LCD and written to the
report log.
The following chart provides the numbers you should use to represent the am and pm hours of the
hours calls are allowed:
From:
To: 12:00
12:59 1:00
1:59 2:00
2:59 3:00
3:59 4:00
4:59 5:00
5:59 6:00
6:59 7:00
7:59 8:00
8:59 9:00
9:59 10:00
10:59 11:00
11:59
am hour 1 2 3 4 5 6 7 8 9 10 11 12
pm hour 13 14 15 16 17 18 19 20 21 22 23 24