Enterasys Networks CSX6000 - Manual (Page 707)

Central Site Remote Access Switch 707
A DMINISTRATIVE C ONSOLE C OMMANDS T ABLE
trace lapb[on/off] enables or disables the packet tracing option for LAPB
data link information
trace ppp [on/off] enables or disables the tracing of ppp packets
trace x25 [on/off] enables or disables the packet tracing option for X.25
connection information
udp conns displays UDP connection status
udp stats displays UDP statistics
ver (GUEST) displays current software version and hardware resource
revision information
wa writes current authentication messages to disk
wan fr-ietf stats [device/
fr_accessname_dlci] [prot] displays WAN frame relay connection information for
devices configured for the FR_IETF line protocol
wan fr-ietf trace [on/off] [in/out]
[device/fr_accessname_dlci]
[prot] enables or disables the tracing for WAN FR_IETF packets
wan stats displays current WAN connection information
wr writes current system messages to disk
ws writes current system statistics to disk
x25 clear clears the statistics counters for the currently selected X.25
access
x25 clearall clears all statistics for the currently selected X.25 access
x25 display [access name]
(GUEST) displays the configuration information for the default X.25
access or the specified access
x25 l <LCN “m”> (GUEST) sets LCN index default value to “m”
x25 p <access name> (GUEST) sets X.25 access name default to the specified access name
x25 stats [l <access name>]
(GUEST) displays statistics for the default X.25 access or for the
specified X.25 access
x25 vc <LCN “m”> sets the LCN index default value to “m”, which will
specify the default virtual circuit
x25 vc active lists all active virtual circuits
x25 vc clear clears statistics for a virtual circuit
x25 vc stats displays statistics for a virtual circuit
Command
Use