Enterasys Networks CSX6000 - Manual (Page 652)

USER’S GUIDE
652 CyberSWITCH
IfStatRcvBadRoutes
The number of routes, in valid RIP packets, which were ignored for any reason. Example reasons
include: an unknown address family, or an invalid metric.
IfStatRcvRequests
The number of RIP messages with ‘request’ command code received on this interface.
IfStatRcvResponses
The number of RIP messages with ‘response’ command code received on this interface.
IfStatSentRequests
The number of RIP messages with ‘request’ command code sent on this interface.
IfStatSentResponses
The number of RIP messages with ‘response’ command code sent on this interface.
IfStatSentUpdates
The number of triggered RIP updates actually sent on this interface. This explicitly does NOT
include full updates sent containing new information.
S ERIAL I NTERFACE S TATISTICS
Access these statistics by using the ser <# > stats command:
frames sent
Number of frames successfully sent over a serial interface line.
frames received
Number of frames successfully received over a serial interface line.
transmit errors
Number of errors that occurred while sending a frame over a serial interface line.
receive errors
Number of errors that occurred while receiving a frame from a serial interface line.
SNMP S TATISTICS
If the SNMP Agent is enabled, you can access SNMP statistics by using the snmp stats
command. Each of the following statistics are counters that refer to an MIB-2 SNMP group object.
snmpInPkts
The total number of messages delivered to the SNMP Agent from the transport service.
snmpOutPkts
The total number of SNMP messages that were passed from the SNMP Agent to the transport
service.