Viewing throughput information, Viewing throughput information 582 – Enterasys Networks CSX6000 User Manual
Page 582
USER’S GUIDE
582 CyberSWITCH
If there was enough memory for all connections, the connection table would reflect both
potential and actual connections as the same number.
wan stats
Displays the current system WAN connection statistics. Refer to
, for a list of
available statistics and their definitions.
From the “Connection Monitor” screen you can press:
<Arrow Keys>
To select a site that is currently connected.
<Enter>
To view throughput monitoring for the selected site. Refer to the section titled
for details.
<Esc>
To exit the Connection Monitor screen.
V
IEWING
T
HROUGHPUT
I
NFORMATION
The Throughput Monitor screen displays the system throughput monitoring feature in action. To
enter this screen:
1.
Issue the
mc
command to display the connection monitor screen.
2.
Use the <arrow keys> to move the cursor down to the specific site for which you would like to
view throughput information.
3.
Press <enter> to display the throughput monitor screen for that site.
Throughput monitoring information can be very useful for fine-tuning your bandwidth
configuration parameters. Note that this feature is not available through a Telnet session. Refer to
the
chapter for a complete description of throughput parameters.
The actual bandwidth utilization, along with the current underload setting, is displayed for each
throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32
and all other samples are shifted left one position.