Enterasys Networks CSX6000 - Manual (Page 533)

Central Site Remote Access Switch 533
S YSTEM M ESSAGES
System Message Summary
[TFTP] Local error # 2: Feature not initialized
The TFTP feature was not initialized properly. No file transfer will be attempted. Check the
configuration, and then contact your Distributor or Customer Support.
[TFTP] Local error # 3: Server not initialized
The TFTP Server was not initialized. The TFTP Server will not attempt any file transfers. Check the
configuration, and then contact your Distributor or Customer Support.
[TFTP] Local error # 4: UDP rejected packet <filename>
The UDP subsystem could not send the data because there was a problem with the file. If this
message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 5: UDP open failed
The UDP subsystem could not open a new port. No file transfer will be attempted. Check the
configuration, and then contact your Distributor or Customer Support.
[TFTP] Local error # 6: All UDP buffers in use <filename>
All of the TFTP/UDP buffers are in use. There may be a problem with the specified file; try
replacing it. If this message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 7: Received packet with size zero
The TFTP protocol received a packet with no data.
[TFTP] Local error # 8: No route defined <filename>
The TFTP protocol was instructed to start a TFTP session with an IP ADDRESS (HOST) for which
there is no defined route. There may be a problem with the specified file; try replacing it. If this
message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 9: File transfer timed out <filename>
The TFTP file transfer timed out. There may be a problem with the specified file; try replacing it. If
this message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 10: IP addressing inconsistency detected
The TFTP protocol received a packet from a host for which no file transfer was being processed.
This should not affect any files being transferred.
[TFTP] Local error # 11: Received packets out of sequence <filename>
The TFTP protocol received a data packet that either was too old or one was skipped. There may
be a problem with the specified file; try replacing it. If this message appears consistently, contact
your Distributor or Customer Support.
[TFTP] Local error # 12: Bad packet length received <filename>
The TFTP protocol received a packet that was too big. There may be a problem with the specified
file; try replacing it. If this message appears consistently, contact your Distributor or Customer
Support.
[TFTP] Local error # 13: Received unexpected opcode <filename>
The TFTP protocol received a packet that was not expected. There may be a problem with the
specified file; try replacing it. If this message appears consistently, contact your Distributor or
Customer Support.