Enterasys Networks CSX6000 - Manual (Page 565)

Central Site Remote Access Switch 565
R EMOTE M ANAGEMENT
Telnet
IP address of the CyberSWITCH. You will then be presented with the “ Enter Login id: ”
prompt. Now enter commands as if directly connected to the CyberSWITCH.
When finished with the session, enter the exit command at the system prompt to end the session
with the CyberSWITCH.
Terminate the Telnet session by typing logout . This will ensure that the Telnet session has been
terminated, regardless of the specific Telnet client used.
Notes: If you need to quit then restart the CyberSWITCH for some reason (for example, to have
CFGEDIT changes take effect) issue the restart command. Then reestablish your Telnet
session.
If you lose your Telnet connection within 10 seconds of entering the restart command,
the command will not be executed.