Enterasys Networks CSX6000 - Manual (Page 613)

Central Site Remote Access Switch 613
S YSTEM C OMMANDS
RADIUS Commands
radius ipres
Attempts an authentication session using the IP resolution. The following is an example
display of the screen.
radius macres
Attempts an authentication session using the MAC resolution. The following is an example
display of the screen.
radius pap
Attempts an authentication session using PAP. The following is an example display of the
screen.
radius route
Attempts an authentication session using ROUTE LOOKUP. The following is an example
display of the screen.
[System Name]>radius ipres
IP Address of the Host logging in (<RET> to abort)? 19.63.4.5
Send Radius Authentication Request... Please wait
[AUTH] Warning code: 0001 Timeout.
[System Name]>radius macres
MAC Address of the Host logging in (<RET> to abort)? 0ab34252d546
Enter password? password123
Send Radius Authentication Request... Please wait
[AUTH] Warning code: 0002 Missing required attribute from server.
Caller-Id: 2340823-098
Framed-Data-Rate: 64KB
Missing attribute: Device-Name
[System Name]>radius pap
Enter the device name (<RET> to abort)? doe
Enter password (<RET> to abort)? password123
Send Radius Authentication Request... Please wait
Authentication Rejected...
[System Name]>radius route
IP Address to determine route for (<RET> to abort)? 3.3.3.3
Send Radius Authentication Request... Please wait
Authentication Successful...
Device-Name: left.CSX
Framed-Address: 128.111.1.3
Phone-Number: 18005551212
Framed-Data-Rate: 64KB
Framed-Protocol: PPP/IP
Framed-Route:3.0.0.0 255.0.0.0 128.111.1.3 2 RAP(RIP-Always Propagate)