On-node device entries, Configuring on-node device entries, On-node device entries 184 – Enterasys Networks CSX6000 User Manual
Page 184: Configuring on-node device entries 184
USER’S GUIDE
184 CyberSWITCH
2.
Select option (1) On-node Device Database from the Device level Databases menu. The following
screen will be displayed. Follow the on-screen instructions to enable the on-node database
device:
O
N
-
NODE
D
EVICE
E
NTRIES
C
ONFIGURING
O
N
-
NODE
D
EVICE
E
NTRIES
1.
Select On-node Device Entries from the Device Level Databases menu.
2.
The Current Device Table screen will be displayed. Follow the onscreen instructions to add a
device:
3.
Enter the device name. The example screen below shows device DAN being added:
Device Level Databases Menu:
1) On-node Device Database (Enable/Disable)
2) On-node Device Entries
3) Off-node Device Location
Select function from above or <RET> for previous menu: 1
On-node Device Database (Enable/Disable) Menu:
1) On-node Device Database is currently: ENABLED
Select function from above or <RET> for previous menu: 1
Current Device Table (Sorted by Device Name in Ascending ASCII Order)
Id Device Name
---------------------------
There are currently no Devices configured.
1) Add a Device or press <RET> for previous menu: 1
Device Name? DAN