Enterasys Networks CSX6000 - Manual (Page 227)

Central Site Remote Access Switch 227
C ONFIGURING N ETWORK L OGIN I NFORMATION
Login Configuration Specific to RADIUS Server
U SING M ANAGE M ODE
netlogin
Displays the current network login configuration data. After entering the netlogin
command, you will be prompted for the type of login configuration information you want. The
prompt will resemble the CFGEDIT screen in which this information was originally
configured. You may display: user level security general configuration, login banners, login
configuration specific to RADIUS, and login configuration specific to TACACS.
netlogin change
Allows you to change the current network login configuration data. After entering the
netlogin change command, you will be prompted for the type of login configuration
information you want to change. The prompt will resemble the CFGEDIT screen in which this
information was originally configured. You may change: user level security general
configuration, login banners, login configuration specific to RADIUS, and login configuration
specific to TACACS.
L OGIN C ONFIGURATION S PECIFIC TO RADIUS S ERVER B ACKGROUND I NFORMATION
Login configuration parameters specific to RADIUS include the specification of prompt order and
a password control character.
The prompt order specified on the system must match the prompt order specified on the RADIUS
server. The default order is:
•
First prompt: LOGIN ID PROMPT (fixed)
• Second prompt: DYNAMIC PASSWORD PROMPT
• Third prompt: USER PASSWORD PROMPT
If you need to change this order, you may specify this order of prompts in the login process.
RADIUS Device Login Prompt Order Menu:
Current Prompt Order is:
-----------------------------------------------------------------
First Prompt is LOGIN ID PROMPT (fixed)
Second Prompt is USER PASSWORD PROMPT
1) Prompt Order
Select function from above or <RET> for previous menu: 1
Prompts available for Second Prompt
1) USER PASSWORD
2) DYNAMIC PASSWORD
Select function from above or <RET> for previous menu: