Enterasys Networks CSX6000 - Manual (Page 570)

USER’S GUIDE
570 CyberSWITCH
C
ARBON
C
OPY
The Carbon Copy feature gives you complete remote management. Any command that you can
issue on a local console session can be issued with Carbon Copy. Files can also be transferred
between the Manager PC and the CyberSWITCH.
The disadvantage of using Carbon Copy is that a separate telephone line must be connected to each
CyberSWITCH being managed. Another disadvantage is that the Manager PC must be an AT
compatible PC.
I NSTALLATION AND C ONFIGURATION
When using the Modem Remote Administration Console, the connection to the CyberSWITCH is
done using standard modems. Modems and cables are NOT provided with the CyberSWITCH.
When an CyberSWITCH is delivered, Carbon Copy is configured for a Direct Remote
Administration Console. To set your system up for a Modem Remote Administration Console, you
must reconfigure Carbon Copy’s baud rate and modem type parameters. Instructions for changing
these parameters are listed below.
C HANGING CARBON COPY C ONFIGURATION P ARAMETERS
The Carbon Copy CCINSTAL program is available on the CyberSWITCH and on the Manager
diskette. (The diskette is available as an option when you order your CyberSWITCH). You can use
this program to change Carbon Copy parameters such as password, COM port, baud rate and
modem type.
To change Carbon Copy parameters on the CyberSWITCH, terminate the CyberSWITCH by typing
quit . Next, enter the following command at the MSDOS prompt to change the current directory
to “ADMIN”:
C:\>cd \admin
WAN
Modem
Modem
LAN
Phone Company
CSX5500