Trace commands, Trace commands 622 – Enterasys Networks CSX6000 User Manual
Page 622
USER’S GUIDE
622 CyberSWITCH
tftp session
Displays the TFTP session information of active TFTP sessions. To get detailed information on
a specific session, enter the session’s Id number when prompted. You can not display the
session information for a TFTP session that has terminated. The following screen illustrates the
use of this command.
tftp stats
Displays the current TFTP related statistics. Refer to
, for a list of available
statistics and their definitions.
T
RACE
C
OMMANDS
Note:
For an explanation regarding the output resulting from the family of trace commands, refer
chapter.
The following commands are used to enable and disable trace reporting information:
> TFTP PUT
>IP Address of the Host to receive the file
(<RET> to abort)? 19.233.45.33
>Enter the name of the local file to send (including the full path)
(<RET> to abort)? \config\config.nei
>Enter the name for the remote file (including the full path)
(<RET> for same as local)? <RET>
Enter the mode (BIN [binary] or ASC [ascii])
<RET> for ascii? bin
Sending File... Please wait
File Transfer Complete...
> TFTP SESSION
Id Sess-Id Local file Type/Mode Bytes Xmit Retries
----------------------------------------------------------
1 5 temp.txt Client/Put 12752 1
2 6 tmp Server/Get 423 0
3 7 text.txt Server/Put 8481 0
Select the ID of the TFTP Session to display or <RET> to cancel? 2
TFTP Session ID: 6
Type: Server
Mode: Get
Local Address: 190.5.6.8 (UDP Port: 5001)
Local File: c:\tmp
Remote Address: 190.5.6.11 (UDP Port: 5011)
Remote File: N/A
Transfer Mode: netascii
Bytes Transferred: 935
Bytes Remaining: 1145723
Total Retries: 0