Provisioning settings for at&t 5ess switches, Provisioning settings for at&t 5ess switches 76 – Enterasys Networks CSX6000 User Manual

Page 76

Advertising
background image

USER’S GUIDE

76 CyberSWITCH

If the AT&T 5ESS switch type is available, the ISDN services available will be one of the
following:

NI-1

Custom Point-to-Point

If Northern Telecom DMS-100 switch type is available, the ISDN services available will be one
of the following:

NI-1

DMS-100 Custom

3.

Refer to section in this document that applies to your service type.

4.

Order your ISDN service. If available, ask for two telephone numbers and two

SPIDs

for your

ISDN line.

5.

If necessary, provide your service provider with the appropriate provisioning settings in this
document.

6.

After installation, make sure you have the following information:

switch type

telephone numbers

SPIDs

The following sections provide provisioning settings for your specific service type.

P

ROVISIONING

S

ETTINGS

FOR

AT&T 5ESS S

WITCHES

The ISDN services supported by AT&T 5ESS switches are as follows (in order of preference of
usage):

1.

NI-1

2.

AT&T Custom Point-to-Point

The sections below provide the settings for each 5ESS service type. Note that your service provider
may not be able to offer all of the features listed.

Advertising
This manual is related to the following products: