Document Outline

• 1
  • Feed Function
• 1.1 F-1 Digit Selection Signal 1-2
• 1.2 No. 2 G00 Mode Signal 1-3
• 1.3 Feed Completed Output Signal 1-4
• 1.4 Feed Override Input and Feedrate Override Cancel Input Signals 1-5
• 1.5 Pulse Handle Axis Selection Signals 1-7
• 1.6 Rapid Traverse Override Input Signal 1-8
• 1.7 Manual Feed Axis/Direction Selection Input Signal 1-9
• 1.8 Solid Tap 1-10
  • 1.1 F-1 Digit Selection Signal
    • 1. If the F1 digit feed function is selected, it is not possible to designate feedrates of 1mm/mi...
    • 2. If the dry run switch is ON, the feedrate set for dry run operation is valid.
    • 3. The feed override function is invalid when the F-1 digit feed function is used.
    • 4. Feedrates set for setting parameters pm0820 to pm0828 remain valid even if the power is turned...
    • 5. Feedrates called by the designation F1 digit codes are clamped in the following manner:
  • 1.2 No. 2 G00 Mode Signal
  • 1.2.1 No. 2 G00 Mode Input Signals (#31019 to #31014)
  • 1.2.2 No. 2 G00 Mode Input Signals (#36280 to 36284)
  • 1.3 Feed Completed Output Signal
  • 1.4 Feed Override Input and Feedrate Override Cancel Input Signals
  • 1.5 Pulse Handle Axis Selection Signals
  • 1.6 Rapid Traverse Override Input Signal
  • 1.7 Manual Feed Axis/Direction Selection Input Signal
  • 1.8 Solid Tap
    • 3
• 3.1 Calendar Output Signal
  • 4
  • M, S, T And B Functions
  • 4.1 Input/Output Signals of M,S,T and B Codes
    • M code output
    • MA0 to MA9
    • #35200 to #35211
    • S code output
    • SD00 to SDO23
    • #36540 to #36567
    • Tcode output
    • TO to T19
    • #35300 to #35323
    • B code output
    • B0 to B15
    • #35330 to #35347
    • M code read output
    • MF
    • #35350
    • S code read output
    • SF
    • #36517
    • T code read output
    • TF
    • #35357
    • B code read output
    • BF
    • #35355
  • 4.2 S5-Digit Command Input Signal
    • S Code Analog Output Inverse Input
    • SINV
    • #31104
    • S Code Analog Output Status Output
    • SINVA
    • #36500
    • Spindle Gear Range Input
    • GR1 to GR4
    • #31100 to #31103
    • pm1404
    • Max. spindle speed when “GR1” input is “closed”
    • Ö
    • pm1405
    • Max. spindle speed when “GR2” input is “closed”
    • Ü
    • pm1406
    • Max. spindle speed when “GR3” input is “closed”
    • á
    • pm1407
    • Max. spindle speed when “GR4” input is “closed”
    • à
    • pm1400
    • Max. spindle speed when “GR1” input is “closed”
    • Å
    • pm1401
    • Max. spindle speed when “GR2” input is “closed”
    • Ç
    • pm1402
    • Max. spindle speed when “GR3” input is “closed”
    • É
    • pm1403
    • Max. spindle speed when “GR4” input is “closed”
    • Ñ
  • 4.3 Gear Range Selection Input and Output Signals
    • Gear Range Selection Command Output
    • GR1S to GR4S
    • #36504 to #36507
    • S Function Finish Input
    • SFIN
    • #31117
    • Gear Shift Input Signal
    • GRO
    • #31107
    • Spindle Fixed Speed Input Signal
    • SOR
    • #31106
    • 0
    • 0
    • Voltage corresponding spindle speed specified in CNC program
    • 0
    • 1
    • Voltage set for parameter pm1412
    • 1
    • 0
    • Voltage set for parameter pm1413
    • 1
    • 1
    • Voltage set for parameter pm1413, 0 V
    • Spindle Speed Agreed Input Signal
    • SAGR
    • #31116
    • Spindle Speed Override Input Signal
    • SPA to SPE
    • #31110 to #31114
    • 1
    • 1
    • 1
    • 50%
    • 0
    • 1
    • 1
    • 60%
    • 0
    • 1
    • 0
    • 70%
    • 1
    • 1
    • 0
    • 80%
    • 1
    • 0
    • 0
    • 90%
    • 0
    • 0
    • 0
    • 100%
    • 0
    • 0
    • 1
    • 110%
    • 1
    • 0
    • 1
    • 120%
    • 0
    • 0
    • 0
    • 1
    • 0
    • 10%
    • 0
    • 0
    • 1
    • 1
    • 0
    • 20%
    • 0
    • 1
    • 1
    • 1
    • 0
    • 30%
    • 1
    • 1
    • 1
    • 1
    • 0
    • 40%
    • 1
    • 1
    • 1
    • 0
    • 0
    • 50%
    • 0
    • 1
    • 1
    • 0
    • 0
    • 60%
    • 0
    • 1
    • 0
    • 0
    • 0
    • 70%
    • 1
    • 1
    • 0
    • 0
    • 0
    • 80%
    • 1
    • 0
    • 0
    • 0
    • 0
    • 90%
    • 0
    • 0
    • 0
    • 0
    • 0
    • 100%
    • 0
    • 0
    • 1
    • 0
    • 0
    • 110%
    • 1
    • 0
    • 1
    • 0
    • 0
    • 120%
    • 1
    • 0
    • 1
    • 1
    • 0
    • 130%
    • 1
    • 0
    • 0
    • 1
    • 0
    • 140%
    • 1
    • 0
    • 0
    • 1
    • 0
    • 150%
    • 0
    • 1
    • 0
    • 1
    • 0
    • 160%
    • 0
    • 1
    • 0
    • 1
    • 1
    • 170%
    • 0
    • 1
    • 0
    • 0
    • 1
    • 180%
    • 0
    • 0
    • 0
    • 0
    • 1
    • 190%
    • 1
    • 0
    • 0
    • 0
    • 1
    • 200%
    • Binary S Command Input Signals
    • SDI0 to SD123
    • #36540 to #36567
• 10
• Safety and Maintenance Functions