Yaskawa VS-616G5 Series Revision F Quick-Start - Manual (Page 115)

112 VS-616G5 Installation & Quick-Start Manual
EU Manufacturer’s Declaration
Products
Static inverter, series VS-616G5
Scope
YASKAWA inverters are components (BDM*, defined by IEC 22G/21CDV) designed exclusively
for installation in machines or systems (end products) by qualified re-users (e.g. mechanical engineer-
ing manufacturers).
Responsibility
As a component manufacturer we are responsible for the provision of installation instructions. These
can be found in the installation guidelines publication EZZ006908 (a Yaskawa publication free upon
request).
Our products have been tested by authorized bodies pursuant to the requirements of the standards
listed below. The products conform to these standards, subject to due and proper observation of the
installation instructions provided in section 10 of this manual:
Immunity — EMC resistance pursuant to EN50082-2, Part 2:
EN 61000-4-2Resistance to static discharge
EN 61000-4-4Resistance to high-speed transients and bursts
EN 61000-4-8Testing of resistance to magnetic fields with power systems frequencies
ENV 50140Resistance to high-frequency magnetic fields
ENV 50141Resistance to conducted interference
Emissions — EMC interference emissions pursuant to EN50081-2, Part 2:
EN 55011 Class A or B limit curve under the conditions described in the operating instructions in
the installation guidelines, EZZ006908.
YASKAWA Electric Europe GmbH
Am Kronberger Hang 2
65824 Schwalbach am Taunus
Germany
Always observe all the safety instructions provided in this product documentation!
* AdÜ: Abkürzung bitte kontrollieren.
Appendix
CE Conformance Information