3 run/stop condition – KACO blueplanet 750 - 1000 kVA User Manual
Page 38
Advertising

Page 38
KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0
Storage/Installation/Start-up
5.7.3 Run/Stop Condition
The BP1000/875/750 TL3 OD DE inverter supports On/Off function using Key Switch and CMT software. The
states about each condition are below sequence diagram.
Figure 25: Run & Stop Condition about Key Switch & CMT
The BP1000/875/750 TL3 OD DE inverter can be turned on & off using only Key Switch, and can be turned off
through ‘Off’ command of CMT. If the inverter is turned off by ‘Off’ command of CMT, the Fault Lamp is tog-
gled. Because the Key Switch is on state. And it is turned on by ‘On’ command of CMT or to turn off & on by
Key Switch.
Advertising