KACO blueplanet 750 - 1000 kVA - Manual (Page 53)

KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0 Page 53
Storage/Installation/Start-up
" Select the file that you copied earlier.
" Press the “Open” button.
The HMI transfers the file to the control unit. If the file transfer was successful, the following message will
appear:
“HMI has finished upgrading XCU.”
The control unit has now been successfully upgraded.
An error message indicates that the process was not successfully completed.
" Press the ON button in the main menu to activate system operation.
/mnt/sdcard Search in:
XCU_SW.hex
XCU_SW.hex
*.hex *.HEX *.Hex
File name:
File type:
Open
Cancel
Upgrade C6x
Connecting to XCU ...
Figure 53: Dialog box for opening files Figure 54: C6x upgrade screen
PRESS BS KEY TO DOWNLOAD
FLASH LOCK OK!
SYSTEM STARTUP!
VERIFY FLASH CHECKSUM OK!
PARAMETERS CHECKSUM OK!
SYSTEM BOOT SUCCESS!
>>>MMI has finished upgrading XCU.
Upgrade C6x
Figure 55: C6x upgrade screen (complete)
NOTE
Communication between the HMI and the control unit (XCU) is interrupted during the
upgrade process and automatically resumes once the download is complete.
5.11.18 Other menus and details
Some menus can only be accessed by service technicians from KACO new energy Inc., and are therefore not
described in this manual.