KACO blueplanet 750 - 1000 kVA - Manual (Page 39)

KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0 Page 39
Storage/Installation/Start-up
5.8 User interface
The HMI has a graphic interface which you use to monitor and control the inverter. The HMI has the following
functional features:
• HMI is located on the inside of inverter. In order to view the HMI LCD screen, Using CMT or Key-Switch to
Stop inverter. And then open the AC part door.
Figure 26: Installed posion of HMI
• The LCD screen displays the states of inverter, along with voltages, currents, frequencies, temperatures, out-
put powers, status of errors/warning messages, and events. Pressing the HMI touch screen switches on the
LCD backlight. If the display is not activated within five minutes, the LCD backlight switches automatically off.
• Touch screen for navigating through the menus SD card: the HMI continually records data to the SD card.
When recording once every 10 minutes (around the clock), the maximum amount of data per year is 360 KB.
When the SD card is full, the oldest data is overwritten.
• Configuration of country-specific settings (power grid standard, maximum / minimum voltage / frequency)
• Ethernet interface for monitoring and service, network connection for remote use
• RS485 interface for logging and transferring data
• USB interface for connecting external units (e.g. laptop computer)