KACO blueplanet 750 - 1000 kVA - Manual (Page 96)

Page 96 KACO blueplanet 1000/875/750 TL3 M1 IS OD DEX0
Parameters
8.2 Functions
8.2.1 MPPT (Maximum Power Point Tracking) Function
Figure 73: Characteristic of PV Curve
BP SERIES Inverter start operation when Voc (open circuit voltage) is higher than {MPPT V Start} during {MPPT
T Start} and initial MPP Voltage is start at {MPP Factor} * Voc, and MPP voltage is changed within the MPP range
to generate maximum power. Default value of MPPT Parameters can be changed by Model.
Tab Number Parameter Min Max Default Value
PV Array
0 MPPT Eanble 0 1 1
1 MPPT V Maximum 0 830 830V
2 MPPT V Start 200 800 700Vc
3 MPPT T Start 0 3600 900sec
6 MPPT V Minimum 200 800 505V
7 DC Over Voltage Level 300 1020 1020V
9 MPP Factor 0 1 0.8
12 PV Operation Level 900 1020 1000V
Table 20: Related Parameters (ex. BP1000 Model)