TA Triumph-Adler FAX 925 - Manual (Page 122)

English
Appendix B - ISDN G4 Option 114
ISDN dial mode (communication parameter)
Set to G3 - The call originates in the G3 mode when dialled from the
Speed Dial. At the time, speech analogue transmission is requested to the
network.
Set to G4 (default setting) - The call originates in G4 mode when dialled
from the Speed Dial. Non-restricted digital transmission is requested to
the network.
Speech receive (user setting 31)
Set to OFF: Allows limited reception of analogue communications. The
limitations when set to OFF depend on the ISDN network that the fax
machine is connected to.
Set to ON (default setting): Enables the reception of analogue communi-
cations from the network.
Note: For analogue transmission capabilities, please contact your
authorised supplier.
Other related functions
The following are a few related functions incorporated to enhance faxing
operations.
Automatic Fallback: If the G4 signal transmitted from the machine is
rejected by the remote location, the machine automatically retransmits the
signal in G3 mode. Similarly, if a G3 signal is received for an in-coming
call, the machine will automatically switch to the G3 mode for the call.
Resolution Conversion: The resolution of a fax is converted according to
the resolution of the document and the capacity of the receiving machine.
Coding Conversion: The coding scheme of the communication is con-
verted according to the scheme for the transmitted document and the
capacity of the receiving machine.
Call Origination: Dialling can be done manually using the numeric key-
pad or via auto dial numbers.
Call Termination: This function provides immediate answering and the
ability to select the type of termination setting (FAX, TEL, MEM, PC or
FWD).