TA Triumph-Adler FAX 925 - Manual (Page 19)

English
Chapter 1 - Introduction 11
16. Pause key (One Touch key 7): Use this key on the One Touch
keypad to enter automatic three second pauses in dialling when
programming telephone numbers. For example, you may want to
use this key to tell your fax machine to wait for an outside or
international line to open. Pauses in telephone numbers are marked
by a “P” symbol.
17. Space key (One Touch key 5): Use this key on the One Touch
keypad to enter spaces while programming or to erase previously
programmed information. Unlike the Pause key, spaces are used for
easier reading only and have no effect on dialling.
18. One Touch keypad: For a description of all the functions of the
One Touch keypad, see the following section “One Touch keypad”.
19. One Touch labels: After programming a location into a One Touch
key, write the name of the location on the One Touch label. Lift off
the plastic cover and use a pencil to write in the name, then replace
the cover.
20. #/Group key: Once you have programmed some One Touch keys
or Auto Dial numbers, use this key to create groups to allow you to
send the same fax to multiple locations. After you have loaded a
document, press the Auto Dial key and use this key to select the
group you want to send your fax to.