TA Triumph-Adler FAX 925 - Manual (Page 52)

English
Chapter 4 - Basic Operations 44
Receiving faxes manually
Note: Receiving faxes manually is not possible when the ISDN option
is fitted.
Your fax machine receives faxes automatically unless the fax machine has
been set to the manual receive [TEL] mode. If your fax machine is set to
the manual receive [TEL] mode, follow the instructions below.
1. When your telephone or fax machine rings, pick up the telephone
handset. If the call is a voice call, start speaking to the caller.
2. If the call is a fax call, or if a person wishes to fax you a document
after having a conversation, press the Start key.
3. When MANUAL START appears on the display, hang up the
handset.
Note: You can also tell your fax machine to start fax reception by
entering your 3 digit code for remote receive using your
telephone keypad. Refer to Remote Receive.
4. After you receive the fax, a long beep tells you that the reception
was successful.
Receiving faxes in memory
Your fax machine automatically receives messages into memory and does
not immediately print them in the following situations.
Memory reception
When your fax machine has been set to Memory Reception Mode [MEM],
any received faxes are stored in the memory of your fax machine and are
not automatically printed. The display shows MSG. IN MEMORY if any
faxes have been received during memory reception mode.
When you change the reception mode of your fax machine, any non-
confidential fax messages stored in memory are automatically printed.
If you want to print any fax messages stored in memory without changing
the reception mode, carry out the following:
1. Press the Select Function key.
2. Press the 2/Print Operation One Touch key. The display shows
PRINT MEMORY MSG?