TA Triumph-Adler FAX 925 - Manual (Page 15)

English
Chapter 1 - Introduction 7
Control panel keys and indicators
1. LCD panel: Refer to this liquid crystal display (LCD) panel for
instructions and information while your fax machine is operating or
while you are programming your fax machine.
2. Transmit resolution/
W YES key: This key changes the resolution
used for transmitting documents. Use STD for standard originals,
FINE and EX.FINE for detailed or small print originals, and
PHOTO for originals that include colours or many shades of grey.
You will also use this key as the W YES key when making
selections or to move your cursor while programming.
3. Type of original/NO
X key: This key selects document contrast
after loading a document for transmission. Use LIGHT for originals
that are too light, NORMAL for documents with good contrast, and
DARK for originals that are too dark. You will also use this key as
the NO X key when making selections or to move your cursor
while programming.
4. Auto Rec key: This key sets the answering mode of your fax
machine. The answering mode controls how your fax machine
answers incoming calls and receives faxes. The display of your fax
machine always indicates your current selection. See Setting the
Answering Mode in Installation for more information about the
answering modes available in your fax machine.
5. Email key: This key allows you to perform the email function. See
Appendix D for more information