TA Triumph-Adler FAX 925 - Manual (Page 50)

English
Chapter 4 - Basic Operations 42
.
Note: When the ISDN G4 option is installed, if a fax number is entered
with the numeric keypad, the fax machine shows the current
transmission mode G3 or G4. To select the current setting, press
the
W
YES key. To change the current setting, press the NO
X
key first and confirm this new setting with the
W
YES key.
Search key dialling
If you are not sure which One Touch key or Auto Dial number contains
the location you want to communicate with, use the Search key to look
through an alphabetical list of all of the Location IDs programmed into
your fax machine.
1. When selecting locations, press the Search key. The display will
show ENTER 1’ST CHAR.
2. Repeatedly press the Search key to look through the entire list of
locations in alphabetical order, or locate the letter you want on the
numeric keypad, and press that key repeatedly to look through
Location IDs beginning with that letter.
3. Press the Start key as soon as the desired location appears on the
display.
Message Explanation
(location)
The Personal ID or TSI/CSI of the remote location. If this is not
programmed in the remote location, the Location ID or telephone
number you entered will identify the location during transmission.
DIALLING Your fax machine is dialling the number.
CALLING The line is ringing.
SENDING Your fax machine is sending the message.
RESULT = OK The fax was sent successfully.
COMMUN. ERROR
If you see this or another error message, a problem occurred during
the communication. Try resending the fax. Refer to Problem Solving
for assistance.