Changing user function settings, Setting distinctive ring – TA Triumph-Adler FAX 925 User Manual

Page 86

Advertising
background image

English

Chapter 6 - Programming

78

38: HALF SIZE SCAN: This function selects handling of the lower half
of the reading data when a small size document was read from the
Flatbed Scanner.

Set to OFF - Does not discard data.

Set to ON - Discards lower half data.

Note 1: With Option I/F Mode set to ‘MFPI’, the function is disabled.

Note 2: This function is only active when the 1284 option board is

installed.

Changing user function settings

1.

Press the Select Function key.

2.

Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.

3.

Press the W YES key. The display shows FUNCTION NO.[

].

4.

Using the numeric keypad, enter the 2-digit number of the function
you want to change. This display then shows the name of the
selected function.

5.

Press the NO X key to cycle through the settings for the user
function, then press the W YES key to confirm your selection. The
name of the next user function appears in the display.

Note:

If you are changing your fax machine’s TX MODE DEFAULT
settings, the new settings will appear on the LEDs above the
Transmit Resolution/

WYES and the Type of Original/NOX.

6.

To select another user function, press the Stop key and return to
step 4.

7.

Press the Select Function key to finish.

Setting distinctive ring

Note:

In some countries, distinctive ring service is not available from
the local telephone company.

1.

Press the Select Function key.

2.

Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.

Advertising
This manual is related to the following products: