TA Triumph-Adler FAX 925 - Manual (Page 63)

English
Chapter 5 - Advanced Operations 55
5. Using the numeric keypad, enter the date on which you wish the
transmission to begin. The display changes to DELAYED TX
DATE [xx/xx] YES (W) NO (X).
Note: [xx/xx] indicates the date you have entered using the numeric
keypad.
6. Press the W YES key. The display shows DELAYED TX TIME [/]
PRG. TIME 0-9
7. Using the numeric keypad, enter the time on which you wish the
transmission to begin. The display changes to DELAYED TX
TIME [xx/xx] YES (W) NO (X).
Note 1: [xx/xx] indicates the time you have entered using the numeric
keypad.
Note 2: Enter the time using the 24-hour clock, i.e., 8:00 a.m. would be
entered as 08:00 and 8:00 p.m. would be entered as 20:00.
8. Press the W YES key and select your first group or location as
follows. The next group or individual location must be selected
within three seconds.
Note: If you want to send a fax to groups and individual locations, the
groups must be selected first.
9. When selecting another group, do not press the Auto Dial key, but
immediately press the # key and enter the code number for the next
group you want to select.
10. Repeat Steps 8 to 9 until you have finished selecting groups and
individual locations.
Select location using Do this
A group
Press the Auto Dial key and then # key in the numeric keypad. Then
enter the code number of the group you want to use.
A One Touch key
Press the One Touch key. If the display asks for confirmation of your
selection, press the Start key.
Auto Dial number
Press the Auto Dial key, then enter the 3 digit Auto Dial code
number on the numeric keypad. If the display asks for confirmation
of your selection, press the Start key.
A number dialled on the
numeric keypad
Dial as you would on a normal telephone. If the ISDN G4 option is
fitted, the fax machine shows the current transmission mode G3 or
G4. To select the current setting, press the W YES key. To change
the current setting, press the NO X key first and confirm this new
setting with the W YES key.