TA Triumph-Adler FAX 925 - Manual (Page 31)

English
Chapter 2 - Installation 23
Connecting a telephone, handset or answering
machine
1. Insert one end of the telephone cable into the TEL1 terminal on the
back of the fax machine.
2. Insert the other end of the telephone cable into the socket in your
telephone, handset or answering machine.
Note 1: To connect both an answering machine and a telephone, first
connect your answering machine to your fax machine and then
insert your telephone’s cable into the telephone socket on your
answering machine.
Note 2: You will need to have the TAD mode feature turned on for an
answering machine to work with your fax machine. See Setting
the Answering Mode later in this user’s guide.
Note 3: When the ISDN option is installed, an external telephone or
answering machine cannot be connected because voice
communication is not supported on this fax machine when using
ISDN.
Connecting the power cable
CAUTION:
Before connecting power, ensure that the power switch is OFF (“0” is in
depressed position)
1. Insert the power cable into the power inlet socket located on the
back of the fax machine.