TA Triumph-Adler FAX 925 - Manual (Page 55)

English
Chapter 4 - Basic Operations 47
6. Press the W YES key to confirm the new setting.
7. Press the Select Function key to finish.
Power failures and memory
If power is interrupted to your fax machine, the following problems occur:
• Any messages your fax machine has scanned into memory, but not
yet transmitted, are lost.
• Any messages your fax machine has received into memory, but not
yet printed, are lost.
• If you have loaded documents onto the document feeder of your fax
machine, any dialling or transmission settings are lost.
Your fax machine prints a power outage report to inform you of a power
failure. Use this report to determine which received messages you may
have lost and which transmissions you may have to resend. Refer to
Reports for more information.
Making copies
Your fax machine can also be used to make copies. You can make up to
50 copies at one time. Your fax machine automatically makes all copies
in FINE mode. STD, EX.FINE and PHOTO mode can be selected
manually by pressing the W YES key.
1. Load the documents to be copied.
2. Press the Copy key. The display shows PRG. NO. OF COPIES
[1SETS]. If you want to make just one copy, you are finished. Your
fax machine waits a moment, then begins copying.
3. To make multiple copies, enter the number of copies you want to
make on the numeric keypad. Then press the Copy key again. Your
fax machine begins making the required number of copies.
Note: When the message PRG. NO. OF COPIES is displayed, the
degree of print resolution can be changed.