TA Triumph-Adler FAX 925 - Manual (Page 32)

English
Chapter 2 - Installation 24
2. Connect the unattached end of the power cable into an earthed AC
power outlet.
3. Switch your fax machine on using the power switch. The time and
current answering mode will appear on the display. Your fax
machine is now in stand-by mode, ready to send or receive faxes.
Loading paper
Your fax machine can hold up to 100 sheets of standard weight (80 gsm)
paper. For best results, use paper specially made for laser printers or
photocopiers.
Your fax machine automatically reduces the vertical length of the page
images it receives to fit on the paper loaded in your fax machine (down to
75% of the original length). For example, if a document created originally
on legal-size paper is received, your fax machine reduces the received
pages to fit on A4 or letter-size paper.
Note: Your fax machine is set at the factory to use A4 paper. If you
intend to use a different paper size, change the PAPER SIZE user
function setting to match your new paper size. See Programming
later in this user’s guide for instructions.
1. Adjust the right paper guide to the width size of your paper.
2. Remove the paper from its wrapper (up to 100 sheets). Note the
“print side” notice printed on the label. Fan the paper.
CAUTION:
Be sure to grasp the paper tightly to avoid slipping of the uppermost sheet of
paper.