TA Triumph-Adler FAX 925 - Manual (Page 65)

English
Chapter 5 - Advanced Operations 57
Keep pressing the Start key until you have checked all the locations
you have entered until the display again shows CHECK
LOCATION(S) YES (STR/LOC.) EXIT (X).
If your entries are OK, press the NO X key and the display shows
ENTRY IS OK? DIAL (START) CHECK (X).
If your entries are OK, press the Start key. Your fax machine will
then scan your document and begin to transmit to your selected
locations.
16. If you want to cancel an entered location when checking locations,
press the NO X key when the display shows xxxxxx OK (START)
CLEAR (X),
Note: xxxxxx indicates the location entered into your fax machine
which you may want to cancel.
The displayed location will be cancelled and the display will show
the next location you have entered. Press the NO X key each time
you want to cancel a location entered into your fax machine. Press
the Start key if the displayed location is OK and to move onto the
next location you have entered into your fax machine.
17. If you want to add another group or location after checking the
groups and locations you have entered, select your new group or
location when the display shows CHECK LOCATION(S).
18. If your entries are OK, press the NO X key and the display shows
ENTRY IS OK? DIAL (START) CHECK (X).
If your entries are OK, press the Start key. Your fax machine will
then scan your document into the memory of your fax machine and
wait until the programmed date and time is reached before sending
your message.
Cancelling delayed transmission
To cancel a delayed transmission from the document feeder or from
memory before it has been sent, follow the instructions below.
1. Press the Stop key. The display shows COMMUNICATION
CANCEL.
2. Press the W YES key. The display shows the Location ID or
telephone number of the first delayed transmission currently loaded
in your fax machine xxxxxx CANCEL (W) OTHER (X).