TA Triumph-Adler FAX 925 - Manual (Page 80)

English
Chapter 6 - Programming 72
Type of Original/NO X keys, your fax machine is set to use the STD and
NORMAL settings. If you are constantly sending faxes which require
some other combination of transmission modes, use this function setting
to change the default transmission modes to any other combination of
settings. While you are programming, the new default combinations will
appear on the LEDs above the Transmit Resolution/W YES or Type of
Original/NO
X key.
10:T/F TIMER PRG.: When set to the telephone/fax answering mode,
your fax machine automatically distinguishes between incoming voice
and fax calls. If the incoming call is a voice call, your fax machine will
ring to tell you to pick up the handset. If you do not answer, your fax
machine automatically switches back to facsimile mode to allow the
calling party to manually send a fax. The T/F TIMER function controls
how long your fax machine waits before switching back to fax mode.
Available settings are 20 seconds or 35 seconds
11:RING RESPONSE: This function controls how long your fax
machine waits before answering an incoming telephone call when your
fax machine is set to auto receive or telephone/fax auto switch answering
modes. The available settings are 1 ring, 5 seconds, 10 seconds, 15
seconds or 20 seconds.
Note: If your fax machine is set to telephone/fax auto switch answering
mode, it is recommended that you set ring response to one ring.
12:DISTINCTIVE RING: Distinctive ringing is a service offered by
some telephone services that allow you to have different numbers on one
line, each with its own distinctive ring. In this way, when you get an
incoming call, you can identify what number is being called by the ring
pattern. Your local telephone service can provide you with more
information about this service and if it is available. If available, this
service is usually offered as a monthly charge to your normal telephone
bill. To use this function, refer to Setting Distinctive Ring.
Note: If the ISDN G4 option is installed, T/F Timer Prg., Ring
Response and Distinctive Ring are not available.
13:PAPER SIZE: This function allows you to tell your fax machine what
size of paper you are using in the paper tray and manual paper feed of your
fax machine. Available settings are A4, letter, legal 13, legal 14,
executive, A5, A6 and JIS B5.
14:USER LANGUAGE: This function allows you to switch between the
two languages programmed into your fax machine