TA Triumph-Adler FAX 925 - Manual (Page 78)

English
Chapter 6 - Programming 70
Chapter 6 - Programming
Customising features and operations
Many features and functions of your fax machine have settings which can
be changed to customise the operations of your fax machine. Because
each country has different regulations, you may not be able to access all
of the settings listed below. If you have trouble changing a setting, contact
your supplier for assistance.
Viewing your current settings
Follow these instructions to obtain a configuration report showing your
fax machine’s current settings.
1. Press the Select Function key.
2. Press the 6/Report Print One Touch key. The display show
1:ACTIVITY REPORT.
3. Using the numeric keypad, press 5. The display shows
5:CONFIGURATION.
4. Press the W YES key and the report will begin printing.
5. Press the Select Function key to finish.
User function settings
User function settings allow you to customize the general operation of
your fax machine. Refer to the list below to determine which settings you
may need to change, then refer to Changing User Function Settings to
make the change.
Note: Depending on local telephone regulations, some of the following
user function settings may not be available.
User function settings list
01:MCF. (SINGLE-LOC.): This function automatically prints a
Message Confirmation Report after each single location transmission or
polling transmission. Available settings are on and off.