TA Triumph-Adler FAX 925 - Manual (Page 84)

English
Chapter 6 - Programming 76
Note: CNG Count is not supported when the ISDN G4 option is
installed.
30:600DPI FAX TX: This function allows you to enable 600dpiread
when Ex.FINE is selected for the TX RESOLUTION. The settings are
ON and OFF.
31:ISDN DIAL MODE:
Set to G3 - The call originates in G3 mode when dialled from the
numeric keypad. Speech Analogue transmission is requested from
the network.
Set to G4 - The call originates in G4 mode when dialled from the
numeric keypad. Non-restricted digital transmission is requested
from the network.
Note: This function is only active when the ISDN option board is
installed.
32: SPEECH RECEIVE:
Set to OFF - incoming voice transmissions from the network will
not be answered.
Set to ON - incoming voice transmissions from the network will be
answered.
33: OPTION I/F MODE:
Set to MFPI - Your machine operates in MFPI Mode
Set to SCN. - Your machine operates in “Flatbed Scanners” Mode
and ‘Down Load Print’ Mode (Down load a print that is connected
to a Flatbed Scanner and direct-couples to a PC).
Set to NET - Your machine operates in “Down Load Print” Mode.
(Down Load Print via a Network Server)
Note 1: After changing the setting of this function, you must reboot your
machine.
Note 2: This function is only active when the 1284 option board is
installed.