TA Triumph-Adler FAX 925 - Manual (Page 51)

English
Chapter 4 - Basic Operations 43
Real-time dialling
Normally, your fax machine dials the entire number of the location you
have selected at one time. Occasionally, it may be necessary to dial
numbers in real time (one digit at a time). If your fax machine is equipped
with a handset, you can dial in real time by picking up the handset or press
the Hook/V. Request key.
Note: Real-time dialling with use of the Hook/V. Request key is not
available in some countries. Also, when the ISDN option is fitted,
real-time dialling is not available.
Redialling
If the line is busy or if there is no answer, your fax machine waits and then
automatically redials the number. Also, if your fax machine is
transmitting from memory and a communication error occurs, it
automatically redials the number and tries to send the fax again. You can
redial a number manually at any time by pressing the Redial key.
Confirming results
After transmission, press the Copy key once (with no documents loaded)
to see a report confirming your transmission on your fax machine’s
display. To print the report, press the Copy key a second time. See
“Chapter 7 - Reports” for more information.
Stopping a transmission
To stop a transmission while it is in progress, follow the instructions
below.
1. Press the Stop key twice. The display will show STOPPED.
2. If documents are stuck part way through the document feeder, you
may see the following message on the display RELOAD
DOCUMENT. Press the Stop key again. Your fax machine feeds
the document the rest of the way through the document feeder.
Note: If your fax machine cannot feed your document through the
document feeder, refer to Problem Solving.