TA Triumph-Adler FAX 925 - Manual (Page 36)

English
Chapter 2 - Installation 28
Changing answering mode
Follow these instructions to change the answering mode of your fax
machine.
1. Press the Auto Rec key. Your fax machine displays your current
answering mode.
2. Press the Auto Rec key again. Your fax machine switches to the
next answering mode.
3. Continue pressing the Auto Rec key until the answering mode you
want appears on the display. After a short pause, your fax machine
programs the new answering mode and returns to stand-by mode
displaying the new answering mode setting.
Note: If a password has been set in the Memory Reception mode, you
will need to enter the password in order to disable the Memory
Reception mode.
Fax machine identification
Fax machines use the information you will enter here to identify
themselves during communications. In most countries programming this
information into your fax machine is a legal requirement. The information
you will enter here includes:
TSI/CSI: This is the telephone number of your fax machine. This number
appears on displays and reports of other fax machines you are
communicating with. This number may also be printed at the top of faxes
you send to other fax machines.
Sender ID: This is a descriptive title and is usually the location of your
fax machine or the name of your company or office. The Sender ID is
printed at the top of every fax you send. You can enter up to 32 characters.
The first 16 characters of your Sender ID is also used as your Personal ID,
which may appear on displays or reports of other fax machines you are
communicating with.
Note: Some fax machines do not print your TSI/CSI on their received
pages. To make sure that your TSI/CSI is always printed, you can
include your fax number as part of your Sender ID.
Call Back Number: The Call Back Number is a telephone number (not a
fax number) which the operator of the remote machine can use to reach
you. If you use the voice request function while you are transmitting to