TA Triumph-Adler 2256 - Manual (Page 114)

5-8
Operation on the Machine > Copying
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
1 Press the [ Interrupt ] key.
The current print job is temporarily interrupted.
2 Place the originals onto the machine for interrupt copy.
3 Select the functions.
Select the copier functions to use.
4 Press the [ Start ] key.
Interrupt copying starts.
5 When interrupt copying ends, press the [ Interrupt ] key.
The machine resumes the paused print jobs.
NOTE
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and
printing resumes. You can change the delay until interrupt copying is canceled. Change the delay as required.
Interrupt Clear (page 7-17)
NOTE
For loading instructions, refer to Loading Originals on page 5-2 .
Using Various Functions (page 5-11)