TA Triumph-Adler 2256 - Manual (Page 56)

2-28
Installing and Setting up the Machine > Installing Software
Express Install
1 Install using [ Express Install ].
2 Finish the installation.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
When using the Print Box, configure the settings by referring to Setting Up the Print Box on
page 2-37 . When using this machine as a network printer, configure the network by referring to
When Connecting the Machine to the PC on the Network on page 2-38 .
If you are installing the WIA driver, continue by configuring the Setting WIA Driver on page 2-
44 .
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a USB or network cable and that it
is turned on and click
(Reload).
• If the Windows security window appears, click [ Install this driver software anyway ].
NOTE
Configure the settings for options installed on the machine. Device settings can be
configured after the installation is completed. For details, refer to the Device Settings in the
Printer Driver User Guide on the Product Library disc.
1
2
3
4