Mn p – TA Triumph-Adler 2256 User Manual
Page 231
9-13
Troubleshooting > Troubleshooting
M
N
P
Error Message
Checkpoints
Corrective Actions
Reference
Page
Machine failure. Call service.
―
An error has occurred in the machine.
Make a note of the error code displayed
on the message display, and contact
your Service Representative.
—
Maximum Number of
scanned pages. Job is
canceled.
―
Scanning cannot be performed any
more due to insufficient memory of
scanner. Press the [
OK
] key to cancel
the job.
—
Memory is full. Job is
canceled.
―
Unable to continue the job as the
memory is used up. Change the print
resolution from Fast 1200 to 600 dpi.
Refer to Printer Driver User Guide.
—
Error Message
Checkpoints
Corrective Actions
Reference
Page
Network was disconnected.
Is the network cable connected?
Press the [
OK
] key and connect the
network cable.
Is the PC powered on?
Press the [
OK
] key and turn the PC
power on.
—
Cannot find Client Tool.
Press the [
OK
] key and open Client
Tool.
Non-genuine Toner. Press
[Help].
Is the installed toner container our own
brand?
The manufacturer assumes no
responsibility for damage caused by a
non-genuine toner. We recommend that
you only use genuine toner containers.
When you want to use the toner
container currently installed, press the
[
OK
] key and the [
Stop
] key
simultaneously for 3 seconds or more.
—
Error Message
Checkpoints
Corrective Actions
Reference
Page
Paper jammed at MP tray.
―
If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the screen. Leave the
machine on and follow the instruction to
remove the jammed paper.
Paper jammed in cassette #.
Paper jammed in document
processor.
Paper jammed in the right
cover #.
Print data error. Job is
canceled.
―
The job is canceled. Press the [
OK
] key.
—
Print overrun. Job is
canceled.
―
Warning. Low printer memory. The job is
canceled. Press the [
OK
] key.
—