TA Triumph-Adler 2256 - Manual (Page 241)

10-3
Appendix > Optional Equipment
(1) DP-480 "Document Processor (Reverse Automatic)"
PLATEN COVER TYPE H "Original Cover"
Automatically scans originals. Also you can perform duplex copying and split copying.
For document processor operation, refer to
Loading Originals in the Document Processor (Option) on page 5-3 .
When the document processor is not used, please use the PLATEN COVER TYPE H.
(2) DU-480 "Duplex Unit"
Installing the duplex unit allows you to produce two-sided copies. Two-sided copies are available in sizes A3 to A5-R,
Folio, Ledger to Statement-R, Executive, 216 x 340 mm (64 to 105 g/m²).
For two-sided copy settings, refer to Duplex on page 5-13 .
(3) PF-480 "Paper Feeder (300-sheet)"
Up to three additional cassettes identical to the machine's cassettes can be installed in the machine. Paper capacity and
loading method are the same as the standard cassettes. Refer to
Loading in the Cassettes on page 3-7 for loading
paper.
(4) Fax System(X) "FAX Kit"
By installing the FAX Kit, fax send/receive is enabled. Also, it is possible to use it as a FAX Driver, by using it with a
computer. For further details, refer to FAX Operation Guide.
(5) IB-33 "Network Interface Kit"
Since the Network Interface Kit was designed to work with the TCP/IP protocol, in the same way as the main unit, it
fulfills the network printing demands on Windows, Macintosh, and UNIX environments.
Network
Network
Network
MFP