TA Triumph-Adler 2256 - Manual (Page 85)

3-10
Preparation before Use > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m²) or up to 25 sheets of plain paper
(80 g/m²) lager than A4.
For details of the supported paper sizes, refer to Choosing the Appropriate Paper on page 10-9 . For the paper type
setting, refer to Media Type Set. (Media Type Settings) on page 7-15 .
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m²), recycled paper or color paper: 100 sheets
• B4 or larger plain paper (80 g/m²), recycled paper or color paper: 25 sheets
• Hagaki: 15 sheets
• OHP film: 25 sheets
• Envelope DL, Envelope C4, Envelope C5, Envelope #10, Envelope #9, Envelope #6, Monarch, Youkei 4, Youkei 2:
5 sheets
1 Open the multi purpose tray.
Pull out the MP tray extension to match the paper size. Refer to the label which sealed inside
the machine when opening the MP tray.
IMPORTANT
If you are using a paper weight of 106 g/m² or more, set the media type to Thick and set the weight of the
paper you are using.
NOTE
• When you load custom size paper, enter the paper size by referring to Specifying Paper Size and Media Type for the
Multi Purpose Tray (MP Tray Setting) on page 3-15 .
• When you use special paper such as transparencies or thick paper, select the media type by referring to Specifying
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-15 .