TA Triumph-Adler DC 2045 - Manual (Page 161)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-27
3 Touch the “+” key or the “-” key to change the displayed time
to the desired setting (between 1 minute and 45 minutes).
Inch specifications
Auto preheat time
S e l e c t a u t o p r e h e a t t i m e l a s t s e t t i n g
o r w h e n c o py i n g i s d o n e.
Default setting - Machine default
M i nu t e
Back Close
+
–
Metric specifications
Set the time for auto preheat mode after last setting,
or when copying is done.
Back Close Auto preheat time
Default setting - Machine default
Minute
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.
● Copy eject location
Perform the following procedure to set where finished copies will be
ejected.
NOTE
This setting will only be displayed when the optional Document
Finisher or Multi Job Tray is installed on your copier.
1 Display the “Machine default” screen.
(See “(2) Accessing the machine default settings” on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
Form
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
Form
2 Select “Select Copy output mode” in the settings list on the
left side of the touch panel and then touch the “Change #”
key.
The “Select Copy output mode” screen will be displayed.
Inch specifications
Default setting
Machine default
Change #
Default setting
Auto shut-off time
Auto preheat time
Select Copy output mode
Key sound ON/OFF
Silent mode
90 Minute
15 Minute
Tray A
On
Off
Default menu Setting mode
Close
Down
Up
Metric specifications
Default setting
Machine default
Auto shut-off time
Auto preheat time
Select COPY output mode
Key sound ON/OFF
Silent mode
90Minute
15Minute
Tray A
On
Off
Up
Down
Close
Default setting
Default menu Setting mode
Change #
3 Touch the key that corresponds to the desired location.
Inch specifications
Select Copy output mode Back Close
Default setting - Machine default
Set the default copy output destination
Tray 1
Tray A
Tray 2
Tray 4
Tray 3
Tray 5
Metric specifications
Select COPY output mode
Set the default copy output destination.
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Default setting - Machine default
Back Close
Tray A