TA Triumph-Adler DC 2045 - Manual (Page 167)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-33
Default setting
Exposure mode
Exposure adjustment
step
Original quality
Custom original size
(setting No.1 – No.4)
Eco print mode ON/OFF
Paper selection
Paper type (auto paper
selection mode)
Description
Selects between auto exposure and manual
exposure as the default copy exposure mode in the
initial mode.
Changes the incremental step to be used during
adjustment of the copy exposure.
Determines the default setting that will be used for
the image quality in the initial mode.
Sets the custom paper sizes (settings No.1 through
No.4) that can be used under the original size
selection mode.
Determines whether the Eco print mode will be the
default setting in the initial mode. In this case, the
amount of toner that is used to make the copies will
be reduced, and images will be printed out relatively
lighter than normal.
Sets whether the copier will automatically select the
same size of copy paper as the original once an
original is set (APS: auto paper selection mode), or
whether the drawer[cassette] selected “Default
cassette” setting will be automatically selected.
Sets which types of paper can be selected under the
auto paper selection mode.
Available settings
Manual / Auto
1 step / 0.5 step
Text+Photo / Text /
Photo
Off / Input size
Inch specification
Width: 2 – 11
5/8
(inches)
Length: 2 – 17 (inches)
Metric specification
Width: 50 – 297 (mm)
Length: 50 – 432 (mm)
On / Off
APS / Default
drawer[cassette]
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 – Custom 8
Factory
setting
Manual
1 step
Text+Photo
Off
-----
Off
APS
Plain
Reference
page
7-37
7-38
7-39
7-40
7-41
7-42
7-43
(4) Copy default settings
The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most
effective use of your copier.