TA Triumph-Adler DC 2045 - Manual (Page 215)

Section 8 OPTIONAL EQUIPMENT
8-7
(4) Key Counter
The Key Counter is used for checking copier use and is convenient for
centralized management of the number of copies made by each
department as well as the total number of copies made overall on the
machine.
● Installing the Key Counter
Insert the Key Counter securely into the key counter opening.
NOTE
When you are using the key counter function, copies cannot be made
unless the Key Counter is inserted into the copier. If the Key Counter
is not securely inserted into its opening, “Insert key counter.” will be
displayed on the touch panel.
(5) Printer Kit
If the Printer Kit is installed in your copier, you can use the copier as a
printer. For more details, refer to the Operation Guide for the Printer
Kit.
Since a networking board is installed as standard equipment in the
copier, access from multiple computers is possible and the machine
can be used as a network printer.
An optional Network Printer Kit and Hard Disk are available as well.
(6) Network Scanner Kit
If the Network Scanner Kit is installed in your copier, you can use the
copier as a scanner from multiple computers over your network.