TA Triumph-Adler DC 2045 - Manual (Page 168)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-34
Default setting
Default drawer[cassette]
Cover drawer[cassette]
Default magnification
ratio
Auto exposure
adjustment
Auto exposure
adjustment (OCR)
Manual exposure
adjustment (text+photo
mode)
Manual exposure
adjustment (text mode)
Manual exposure
adjustment (photo
mode)
Margin width
Erased border width
Description
Sets one drawer[cassette] that will be selected
automatically regardless of the size of paper loaded
in that drawer[cassette].
* It is NOT possible to select the multi-bypass tray
as the default drawer[cassette].
* The “5th paper” key will only be displayed when
the optional Side Feeder, which is only available
for 55 cpm copiers, is installed on your copier.
Sets which drawer[cassette] will be used to feed the
cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
* The “5th paper” key will only be displayed when
the optional Side Feeder, which is only available
for 55 cpm copiers, is installed on your copier.
Sets whether or not the auto magnification selection
mode will be used to automatically calculate the
appropriate magnification ratio when you select the
size of copy paper.
Adjusts the overall exposure level for the auto
exposure mode.
Adjusts the overall exposure level for scanning with
OCR (Optical Character Recognition) software when
using the optional scanner functions of this copier.
Adjusts the median exposure value when the
text+photo mode is selected for the image quality.
Adjusts the median exposure value when the text
mode is selected for the image quality.
Adjusts the median exposure value when the photo
mode is selected for the image quality.
Determines the default value of the location and
width of the margins in the margin mode.
Determines the default value for the width of the
border to be erased in the two border erase modes.
Available settings
1st paper
2nd paper
3rd paper
4th paper
5th paper
1st paper
2nd paper
3rd paper
4th paper
5th paper
Bypass
Manual / AMS
-3 – +3
-3 – +3
-3 – +3
-3 – +3
-3 – +3
Inch specification
0 – 3/4 (inches)
Metric specification
0 – 18 (mm)
Inch specification
Outside border:
0 – 3/4 (inches)
Center area:
0 – 1
1/2 (inches)
Metric specification
Outside border:
0 – 18 (mm)
Center area:
0 – 36 (mm)
Factory
setting
1st paper
Bypass
Manual
Standard setting
Standard setting
Standard setting
Standard setting
Standard setting
Inch
specification
Left: 1/4 (inches)
Top: 0 (inches)
Metric
specification
Left: 6 (mm)
Top: 0 (mm)
Inch
specification
Outside border:
1/4 (inches)
Center area:
1/4 (inches)
Metric
specification
Outside border:
6 (mm)
Center area:
6 (mm)
Reference
page
7-44
7-45
7-46
7-47
7-48
7-49
7-50
7-51
7-52
7-53