TA Triumph-Adler DC 2045 - Manual (Page 220)

Section 9 TROUBLESHOOTING
9-4
Message
“Paper capacity exceeded. Remove
paper from Finisher.”
“Remove paper from inner tray of
Finisher.”
“Remove paper from Finisher.”
Check paper in Finisher. Incomplete
copies inside.
“Cannot sort this size.” [“Cannot sort
this paper size.”]
“Cannot staple. _____:maximum
capacity (Staple)”
[“Cannot staple. _____ :Max.
staples”]
“Cannot staple this paper type.”
“Cannot punch this size.”
[“Cannot punch this paper size.”]
“Cannot punch this paper type.”
“Staple jam. Remove staples.”
[“Staple jam. Remove staple(s).”]
“Check chad box.”
“Out of staples. Add staples.”
[“Stapler empty. Add staples.”]
“Cannot staple this size.”
[“Cannot staple this paper size.”]
“Printer is out of order. Call service.”
“Tandem Copy is cancelled. Unable
to Tandem Copy under current
setting.” [“Cancel tandem copy.
Cannot tandem copy with the
present setting.”]
“The waste toner box almost full.”
[“The waste toner container is
almost full.”]
“The waste toner box is full.”
[“The waste toner container is full.”]
Procedure
The number of copies stored in the optional Document Finisher has exceeded the
acceptable limit. Remove the copies from the Document Finisher.
There are still copies left in the optional Document Finisher. Remove all of the copies
from the Document Finisher.
There are still copies left on the tray(s) of the optional Document Finisher or inside the
Document Finisher itself. Remove all of the copies from the Document Finisher.
There are unfinished copies among those that have been ejected into the optional
Document Finisher.
The selected paper size cannot be used in the sort/finished mode. For more detailed
information, refer to the Operation Guide for your Document Finisher.
The number of copies stapled in the optional Document Finisher has exceeded the
acceptable limit. For more detailed information, refer to the Operation Guide for your
Document Finisher.
The selected paper type cannot be stapled. Select a different type of paper.
The selected paper size cannot be hole punched. For more detailed information, refer to
the Operation Guide for your Document Finisher.
The selected paper size cannot be hole punched. Select a different type of paper.
Staples have jammed in the optional Document Finisher. Refer to the Operation Guide
for your Document Finisher and remove the jammed staples.
The hole punch chad box in the optional Document Finisher is full. Refer to the
Operation Guide for your Document Finisher and dispose of the hole punch chad.
There are no staples left in the optional Document Finisher. Refer to the Operation Guide
for your Document Finisher and load staples.
Stapling of small size paper, such as 5 1/2 " x 8 1/2 " and A5R, is not possible. For more
detailed information, refer to the Operation Guide for your Document Finisher.
An error has occurred in the optional Printer Kit. Contact your service representative or
an authorized service center.
Tandem copying (option) is not possible. Touch the “Check” key and check the copy
settings.
It is almost time to replace the waste toner box. Contact your service representative or
an authorized service center.
It is time to replace the waste toner box. Contact your service representative or an
authorized service center.
Reference
page
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—