TA Triumph-Adler P-C3560i MFP - Manual (Page 263)

8-6
Setup and Registration (System Menu) > System Menu
Admin Report Settings
[System Menu/Counter] key > [Report] > [Admin Report Settings]
Configure settings for fax functions.
FAX Operation Guide
Result Report Settings
[System Menu/Counter] key > [Report] > [Result Report Settings]
Service Status Prints the service status. More detailed information is available than on the Status Page.
Service personnel usually print the service status pages for maintenance purpose.
Accounting Report Prints the accounting report, allowing you to check the accounts that have been registered on
the machine.
Sub Address Box List Prints the report on the FAX function.
FAX Operation Guide
NOTE
FAX functions are available only on products with the fax function installed.
FAX List (Index)
FAX List (No.)
Outgoing FAX Report
Incoming FAX Report
Optional Network Status Prints the optional network status, allowing you to check the information including optional
network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network
Interface Kit is installed.
Item Description
Send Result Report Automatically print a report of transmission result when a transmission is complete.
E-mail/Folder Automatically print a report of transmission result when E-mail or SMB/FTP transmission is
complete.
Value : Off, On, Error Only
FAX *1
*1 Only on products with the fax function installed.
FAX Operation Guide
Canceled before
Sending
*2
*2 When "E-mail/Folder" and "FAX" are set to [Off], this function will not be displayed.
Print a send result report if the job is canceled before being sent.
Value : Off, On
Recipient Format *2 Select the Recipient Format for the send result report.
Value : Name or Destination, Name and Destination
RX Result Report
*1
FAX Operation Guide
Job Finish Notice Setting Attaches sent images to job finish notices.
Value : Do Not Attach Image, Attach Image
Item Description