TA Triumph-Adler P-C3560i MFP User Manual
Page 365
10-22
Troubleshooting > Troubleshooting
R
Message
Checkpoints
Corrective Actions
Reference
Page
RAM disk error.
―
An error has occurred on the RAM
disk. Job is canceled. Select [End].
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM
disk. If the optional RAM dis is
installed, increase the RAM disk
size by changing RAM Disk Setting
in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
Removable memory
error.
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Select
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
―
―
An error occurred in the removable
memory. The job stopped. Select
[End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the removable memory
is not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory.
―
Removable Memory is
full.
*1
―
Job is canceled. Select [End].
Insufficient free space in the
removable memory. Delete
unnecessary files.
―
Remove originals in
document processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals and
press [Continue].
—
Remove originals from the
document processor, put them back
in their original order, and place
them again. Select [Continue] to
resume printing. Select [Cancel] to
cancel the job.
—